Infrared Vein Finder Multi Purpose

Infrared Vein Finder Multi Purpose Manufactured by Baby Care Equipments


Operating Principle

Infrared Vein Finder acquires an image of subcutaneous veins, the image which results from dealing with the image signal is projected onto the surface of the skin. Thus, a subcutaneous vein image will be displayed on the skin surface of the corresponding position.

Technical Parameter

Effective positive projection distance: 29cm~31cm

Light projection: 300lux~1000lux

Active radiation contains wavelength light: 750nm~980nm

Electrical source: lithium-ion polymer batteries

Service voltage: d.c. 3.0V~4.2V

Prevent into the liquid level: IPX0

Method of Application

Before using the product, medical staff should be familiar with how to correctly locate it in order to get the best detection effect.  In the process of use, it is recommended that the medical staff take a touch and visual observation information for reference, combined with the projected image results to determine the actual location of veins. Please try to keep the observed skin smooth and tight, and give priority to choosing areas of the organization with fewer scars, spots, or hair.

Start The Instrument

Press and release the power button of the panel, then the instrument starts.

After the instrument starts up, power indicator lights up. According to the power quantity, the light shows two colors: white, and blue. White represents high power, and low blue stands for low power.

Repeater Operation Height adjustment: Rotate the high lever knob in order to stretch the base rod, the base rod can be elongated to the highest position. Then, rotate the high lever knob in the other direction to lock. Rotate the high fine-tuning knob to highly fine-tune the base rod.

The medical staff chooses the appropriate target vein to complete the venipuncture.

Imaging mode switch: Insert the needle into the hole of the projection window, and press the imaging mode switch button, image can be switched to blue-white, red-green, and red-white imaging modes.

Image brightness adjustment: Touch the image brightness adjustment button to adjust image brightness.” ” means brightness enhancement, ” ” means brightness reduction.

Shut down: After using, press the power button, the instrument is turned off and the power indicator is extinguished. Suggestions for use

Attention and Caution

Infrared Vein Finder is a kind of medical equipment which it forms the subcutaneous vein image in situ for contactless.

In order to accurately examine the position of the vein, it is suggested to put the product at the proper height and angle, and keep the product located in the center of the target vein.

Don’t look straight at the light source when it is working.

This product belongs to the electronic equipment. There could be outside interference by electromagnetic signals. So please stay away from other equipments when using it.

It is suggested that the instrument should not be used when it is charging.

The instrument has no waterproof function, please keep it from the liquid.

If the product is expected to be not used for a long time, please charge the product fully, clean and package it in a dry, shady, and cool place to store the original packaging materials. Please avoid putting the product upside down and under heavy stuff when storaging.

This product contains lithium polymer batteries; it is strictly prohibited to put the product into a fire. Don’t discard at will and contact the manufacturer for recycling.

We are Manufacturers, Exporters, and Suppliers of Infrared Vein Finder Multi-Purpose at competitive prices from India.

For More Information, visit us at

Model No 

BCVF 110      Infrared Vein Finder Multi-Purpose


There are no reviews yet.

Be the first to review “Infrared Vein Finder Multi Purpose”

Your email address will not be published. Required fields are marked *